Upwork KNOWLEDGE OF GOOGLE SKETCHUP PRO 7 SKILLS TEST 2016

Hello Freelancer, Welcome to allupworktestanswers.com Here to get the KNOWLEDGE OF GOOGLE SKETCHUP PRO 7 SKILLS of Latest version 2016. We are ready here to provide your desire upwork test answer. We already tested all exam test information Available include on here. So Dear, Why Late? Read the below full exam test and get more information from our website.




1. What happens when you click on the icon being pointed at, in the Google toolbar of SketchUp?
Answers:
  1. A 2D image of the current view in Google Earth is placed in SketchUp.
  2. A 3D image of the current view in Google SketchUp is placed in Google Earth.
  3. A 2D image of the current view in Google LayOut is placed in SketchUp.
  4. A 3D image of the current view in Google StyleBuilder is placed in SketchUp.
2. What is the basic pre-requisite for the Flip Edge tool in Sandbox tools to operate?
Answers:
  1. The surface needs to be a grid.
  2. The surface needs to be a group.
  3. The surface needs to contain triangulations.
  4. The surface needs to contain adjacent edges.
3. Out of the tools used for navigation, what is the main difference between Orbit tool and Look Around tool in Google SketchUp?
Answers:
  1. Orbit tool can rotate the view in the vertical direction only.
  2. Look Around tool can rotate the view in the horizontal direction only.
  3. Orbit tool doesn’t function inside enclosed surfaces.
  4. Look Around locks the view from one point.
4. With the Ctrl key you can toggle between two modes of the Tape Measure tool. Which enhanced function does ‘mode a’ perform?
Answers:
  1. Draws a solid line.
  2. Tool gets locked to an inference.
  3. Draws a dotted construction guide.
  4. Tool gets locked to a section.
5. Which of the following steps can help you exit from the Position Camera view?
Answers:
  1. Double click on model
  2. Press Ctrl and double click
  3. Hit the Esc key on the keyboard
  4. Press Shift and right click to exit
6. The basic difference between the Push/Pull tool and the Sandbox Smoove tool is that the:
Answers:
  1. Push/Pull tool works on all surfaces.
  2. Smoove tool requires a 2D surface.
  3. Push/Pull tool requires a grid.
  4. Smoove tool works on surfaces with a grid.
7. How can the transformation as shown in the given illustrations be brought about?
Answers:
  1. View > Face Style > Wireframe
  2. Right click > Explode
  3. View > Hidden Geometry
  4. Right click > Intersect > Intersect Selected
8. What operation does the given tool perform?
Answers:
  1. It enables the user to pan view of the model.
  2. It enables the user to interact with dynamic components.
  3. It enables the user to select a group or a component.
  4. It enables the user to erase an entity from the model.
9. When does Google SketchUp display a warning message to the user as shown in the figure?
Answers:
  1. While using Scale tool on multiple components.
  2. While using the Tape Measure tool to resize models with imported components.
  3. While using the Offset Tool on components loaded from external files.
  4. When you try to resize multiple components with single selection window.
10. Which tool is being used in the illustration shown?
Answers:
  1. Rectangle tool
  2. Offset tool
  3. Scale tool
  4. Draw Polygon tool
11. In the Google Style Builder interface shown in the figure, what happens when you drag the highlighted Sample Stroke into box A?
Answers:
  1. A new model gets generated with the selected stroke style.
  2. All the segments of the model get converted into 32 pixel length.
  3. All segments which are 32 pixels in length attain the selected style.
  4. All segments which are 32 pixels in length get shortened to 16 pixels.
12. When will you see three reference axes and the active area embedded in three concentric enclosures, as in Figure Z?
Answers:
  1. When you Edit Component inside a component.
  2. When you double click on an embedded component.
  3. When you Edit Component inside a component, which is inside a component.
  4. When you right click and choose Explode on multiple components.
13. Of the following, which tool is not found in the construction tools of Google SketchUp 7?
Answers:
  1. 3D Text
  2. Tape Measure
  3. Protractor
  4. Renderer
14. Which of the following statements about 3D Warehouse is UNTRUE?
Answers:
  1. From within SketchUp, you can search thousands of models stored in the 3D Warehouse.
  2. You can download the models from 3D Warehouse and use them in your SketchUp models.
  3. You can share your favorite 3D models by uploading them from SketchUp into the 3D Warehouse.
  4. My Models and My Collections links appear By Default in 3D Warehouse window.
15. What happens when you press the Alt key while using the Walk tool in Google SketchUp?
Answers:
  1. The walk speed increases.
  2. The perspective height increases along the Z-axis.
  3. It enables you to walk through objects taller than 22 inches.
  4. It enables you to jump over objects shorter than 22 inches.
16. When do you see the given dialog box in Google SketchUp?
Answers:
      <li
>When you right click on a component containing 3 dimensional planes and choose Soften/Smooth Edges.
  1. When you double click on a component.
  2. Soften/Smooth edges feature requires a third party plug-in.
  3. When you right click on a component containing perpendicular lines and choose Soften/Smooth Edges.
17. You can generate a report of a SketchUp model in an HTML file or a CSV file. The CSV file format is supported by:
Answers:
  1. MS PowerPoint
  2. MS Word
  3. MS Excel
  4. No application from Microsoft
18. How can one use the pan tool navigation feature with the scroll button of the mouse in Google SketchUp?
Answers:
  1. Ctrl key + Scroll button
  2. Alt key + Scroll button
  3. Shift key + Scroll button<>/span>
  4. Scroll button can only help you zoom in or zoom out
19. Which settings window has been displayed in the given figure? Where can you access it from?
Answers:
  1. Geometry Settings. It can be accessed under Toolbars > Geometry
  2. Shadow Settings. It can be accessed under Windows > Shadows
  3. Style Settings. It can be accessed under Windows > Style
  4. Layer Settings. It can be accessed under Toolbars > Layers
20. In the given illustrations, what is the difference between the types of selection?
Answers:
  1. A selects the polygon and B selects the arc.
  2. A gives Entity Info of the ellipse and B gives Entity Info of the path.
  3. A gives Entity Info of the selected face and B gives Entity Info of the segment.
  4. A and B are identical selections.
21. Which single window, as shown in the figure, will enable you to access all the groups, components and layers used in your model?
Answers:
  1. Groups
  2. Outliner
  3. Components
  4. Scenes
22. Choose the right procedure to zoom in on a particular component of a SketchUp model?
Answers:
  1. Go to View menu > Zoom > Click to grab with mouse > Move up to zoom in
  2. Select Zoom tool > Click to grab with mouse > Move right to zoom in
  3. Go to Camera menu > Zoom Window > Click and drag to zoom in
  4. Press Ctrl > Roll up mouse scroll to zoom in
23. Google Style Builder embedded with Google SketchUp Pro, helps in:
Answers:
  1. applying pre-existing or customized line strokes to models.
  2. applying rendering styles to models.
  3. importing style sheets from online 3D warehouse.
  4. creating AutoCAD compatible models.
24. How can you remove the unused components from the model so that they do not appear in the Components window?
Answers:
  1. Go to Window menu > Preferences > Components settings
  2. Select and delete each unused component from Component window
  3. Click on details submenu on the Components window and choose Purge Unused
  4. Unused components cannot be removed from a SketchUp model
25. What happens when you click on the plus sign as shown in the figure?
Answers:
  1. Another window called Component Info pops up.
  2. Entity Info shortcut gets added to the Toolset.
  3. Additional options appear in an expanded drop down.
  4. Optional information related to the entity is displayed.
26. How can you perform the transformation as shown in the illustration, in Google SketchUp?
Answers:
  1. Draw a rectangle on the face > Go to Push/Pull > Select the face and pull
  2. Select Push/Pull tool > Click on the face and pull
  3. Draw a rectangle on the face > Select Move tool > Press Alt and click to pull up
  4. Select object > Draw a rectangle on the face > Go to Tools > Extrude up
27. If you press Ctrl and double click on the face of a model, which of the selections shown occurs?
Answers:
  1. A
  2. B
  3. C
  4. D
28. To prevent multiple copies of a component from being edited at the same time, you need to right click on the component and choose:
Answers:
  1. Edit Component
  2. Unglue
  3. Explode
  4. Make Unique
29. What would be the correct order of steps to remove the wheel from the model displayed?
Answers:
  1. Select the wheel with Select tool > Erase tool
  2. Right click > Explode > Delete
  3. Select the wheel with Select tool > Select Paint Bucket tool > Fill White color
  4. Right click > Explode till the wheel can be selected as a component > Delete
30. In the Layers Palette shown in the given figure, what happens when you uncheck the box under Visible for Layer 1?
Answers:
  1. Layer 1 disappears from the model.
  2. Layer 1 gets deleted from the model.
  3. Layer 1 appears grayed out.
  4. SketchUp doesn’t allow to hide active layers.
31. Which of the following steps can help you convert two adjoining segments of a line into a single line segment?
Answers:
  1. Draw another line overlapping the two segments, then delete the original segments.
  2. Draw another line segment from the common end point of two segments, then delete the new segment.
  3. Select the two segments, right click and select Make Group.
  4. Select the two segments, choose Intersect, followed by Intersect Selected.
32. How can you enable single click access for Isometric view of a model?
Answers:
  1. Go to View menu > Toolbars > Views
  2. Ctrl + right click on the model
  3. Models created with Architectural Design as Default Drawing Template enable access to Iso view.
  4. None of these.
33. Which of the following statements is FALSE about the Dynamic Components in Google SketchUp 7?
Answers:
  1. Dynamic Components can be accessed under Menu > Window > Components.
  2. Attributes of Dynamic Components are limited to 3 dimensional models which have spatial orientation.
  3. Attributes of Dynamic Components can also contain spatial relationships and pre-assigned behaviors.
  4. Dynamic Components can have attributes assigned to them like Part Number, Cost and Weight.
34. Which toolbar has been enabled in the given illustration?
Answers:
  1. Views
  2. Sections
  3. Faces
  4. Layers
35. While using the Smoove tool from Sandbox, which of the following steps will work?
Answers:
  1. Create a grid on a surface > Explode the grid, if it’s a group > Select Smoove tool > Specify radius of the smoove
  2. Select a surface > Create grid > Select Smoove tool > Hover over the grid
  3. Select a surface grid > Specify the radius or part you need to smoove > Select Smoove tool > Hover over the grid
  4. Select Smoove tool > Create a grid on a surface > Explode the grid, if it’s a group > Use the Scratch tool
36. Where in Google SketchUp 7 can you access the Sample Paint tool? The Sample Paint tool appears as shown above.
Answers:
  1. Window menu > Materials window
  2. Tools menu > Color Picker tool
  3. View menu > Sample Paint tool
  4. View menu > Face Style > Sample Paint
37. Which of the following options would result in drawing of a triangle?
Answers:
  1. Select Circle tool > Draw circle > Type 3s in the Value Control Box
  2. Select Rectangle tool > Draw rectangle > Type 3s in the Value Control Box
  3. Select Polygon tool > Draw a polygon > SketchUp draws a triangle by default
  4. None of these options will end up as a triangle
38. If the horizontal circle of Figure X is selected as path, and Follow Me tool is applied on the vertical triangular surface, which figure would be the outcome?
Answers:
      <l
i>A
  1. B
  2. C
  3. D
39. Which of the following options will not help you import models from 3D Warehouse?
Answers:
  1. Get models from the Components window.
  2. Go to SketchUp Help and Downloads.
  3. Use the Get Models Option under the File menu.
  4. Open the 3D Warehouse in your Internet browser.
40. Using the Smoove tool from Sandbox menu over a grid, how can you move the vertical offset, as shown in the figure, accurately at 12 inches below the grid?
Answers:
  1. Type 12″ and press Enter
  2. Type Offset 12″ and press Enter
  3. Type -12″ and press Enter
  4. Type o-12″ and press Enter
41. Which of the following file types is NOT supported by the Google Style Builder while loading Styles from a template?
Answers:
  1. .png
  2. .bmp
  3. .tiff
  4. .jpg
42. In Google Style Builder, what does the interface icon shown in the figure do to the model?
Answers:
  1. It will enable or disable section views.
  2. It will enable or disable model shadows.
  3. It will toggle between current view and last view.
  4. It will toggle between wireframe and X-ray view.
43. Which of the following statements is UNTRUE about the Google LayOut application?
Answers:
  1. LayOut has an inference system that locates significant points and alignments as you draw.
  2. In LayOut, setting Line Weight to less than one point creates finer lines.
  3. LayOut lets the user create presentations by selecting ‘Start Presentation’ under View Menu.
  4. In LayOut, the model can be exploded into its components by a double click of the mouse.
44. What happens when you choose Send to LayOut in the File menu?
Answers:
  1. Google SketchUp creates a layout.
  2. SketchUp model is exported to Google LayOut program.
  3. Google SketchUp creates a template.
  4. The selected component is saved as a layout.
45. In order to convert a single surface into a component, you may not get the option of Make Component in the context menu, as shown in the figure. What could be a possible workaround for this?
Answers:
  1. A single surface cannot be converted into a component.
  2. Select bounding edges to enable the option Make Component.
  3. Press Ctrl and right click on the surface again.
  4. Go to Edit menu and choose Make Component from the drop down.
46. The SimplifyContours.rb Ruby script file is available for free download from www.sketchup.com/downloads. What does this file do?
Answers:
  1. It enhances Soften/Smooth Edges feature.
  2. It improves the performance of Sandbox tools.
  3. It displays the model edges more accurately.
  4. It renders contours of hidden surfaces inside the model.
47. How can the mirror image of an object be created in Google SketchUp?
Answers:
  1. Go to Tools > Rotate at an angle of 180 degrees > Create duplicate
  2. Select object > Go to Tools > Mirror tool
  3. Go to Protractor tool > Rotate at 180 degrees > Create duplicate
  4. Select object > Create duplicate > Go to Scale tool > Pull in opposite direction
48. If you are unable to select an edge to use the dimension tool in SketchUp, what could the reason possibly be? Refer to the given figure.
Answers:
  1. The Edges are hidden
  2. Entity is a group
  3. The Group is locked
  4. Layer is default layer
49. What happens when you click on the image at which the arrow points?
Answers:
  1. It opens Styles window for Materials.
  2. It toggles view with hidden geometry.
  3. It updates the Materials window.
  4. It sets the material to paint with default.
50. What is the default number of segments of circle drawn in SketchUp?
Answers:
  1. 30
  2. 24
  3. 16
  4. 34
51. Which of the following four methods would not work for the Follow Me tool?
Answers:
  1. Preselect a face or an enclosed surface as a path.
  2. Use the Alt key to define a path around a face.
  3. Preselect edges of a path that may or may not lie on the surface.
  4. Select curved, folded and internal edged surfaces.
52. Where will you find the settings window as shown above? What do the brackets signify?
Answers:
  1. Views window. The brackets mean the geometry is hidden.
  2. Animation window. The brackets mean the scene is included in animation.
  3. Scenes window. The brackets mean the scene is excluded in animation.
  4. Materials window. The brackets mean the material will not show in animation.
53. Which of the following context menu sub-options will NOT work for the Intersect tool in SketchUp?
Answers:
  1. Intersect with Model.
  2. Intersect Selected.
  3. Intersect with Group.
  4. Intersect with Context.
54. Where can you locate the geometric parameters/attributes of an imported component or a model in Google SketchUp?
Answers:
  1. Right click > Entity Info
  2. Window menu > Components > Statistics tab
  3. Window > Preferences > Component Info
  4. View menu > Toolbars > Dynamic Components
55. How can you access the following Animation settings in Google SketchUp 7?
Answers:
  1. View menu > Animation > Settings
  2. Window > Animation > Settings
  3. Tools menu > Views > Settings
  4. None of these.
56. What does the selection in the given figure depict?
Answers:
  1. It depicts locked components.
  2. It depicts a group of model entities.
  3. It depicts a component plane.
  4. It depicts a section plane view.
57. What is the correct procedure to create a duplicate of a component in Google SketchUp 7?
Answers:
  1. Select component > Ctrl C > Click a different location > Ctrl V
  2. Select component > Go to Tools > Duplicate
  3. Select component > Alt + Left click > Click to drag the duplicate
  4. Select component > Ctrl + Move tool > Click to drag the duplicate

Finally no more words require about the KNOWLEDGE OF GOOGLE SKETCHUP PRO 7 SKILLS  information in this session of this content. If you are require knowing more, Please ask to us via our contact us form or comment box. Please make sure that, you don’t send Personal information via the Comment box.  Thank you very mutch for being with us

0 comments: